Mobile phone system*
92
Storing a name tag for an entry
You can assign name tags to the entries in the on-board
phone memory.
– Use the
button
on the multi-function steering wheel
to switch to the telephone function. A phone book
entry will appear on the instrument panel display.
– Roll the left thumbwheel until the desired entry is shown in the
instrument panel display.
– Press the talk button
on the multi-function steering wheel
. You will hear a tone.
– Give the command
CORRECT
.
– When requested by the speech control system, please say the
name ("tag") under which you wish to store the phone book
entry.
– Repeat the name when the speech control system gives you the
cue. The name tag for the selected phone book entry will be
stored in the phone book for the speech control system.
If a name tag has been stored for a phone book entry, that entry will be
marked by a horizontal arrow
in the instrument panel display. This
arrow will help you identify the phone book entries to which a name tag has
been assigned.
Note
In some cases the command
STORE
may not be available immediately after
inserting the mobile phone in the adapter. The system will say
The function
is not possible
. The command will be available when the phone book entries
have been scanned into the memory
Fig. 110 Multifunction
steering wheel: left thum-
bwheel and MODE button
Fig. 111 Instrument
panel display: phone
book entry with assigned
name tag
MODE
A
2
A
1
media_systemE_EN.book Seite 92 Montag, 21. September 2009 1:48 13
