Seat Arona 2018, Owner'S Manual

Page: 111 / 372

Instruments and warning/control lamps
Changing memory (vehicles with digital
instrument cluster)
While in
Travel data > General infor-
mation
press

on the multi-function steer-
ing wheel to switch between the 3 memo-
ries
1) :
The memory is deleted if the
journey is interrupted for more than 2
hours.
Display and storage of
the journey data and the consumption
values collected. When refuelling, the
memory is deleted.
This memory contains travel data
up to a maximum of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes, or up
to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets
●
Select the memory that you wish to erase.
●
Hold the

button of the multifunction
steering wheel or the

button of the multi-
Since start
Since refuelling
Long-term
function wheel pressed down for about 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehi-
cle settings, you can display different travel
data
›››
 page 34 .
The current
fuel consumption display operates
throughout the journey, in litres/100 km;
and with the engine running and the ve-
hicle stopped, in litres/hour.
The average
fuel consumption is displayed after driv-
ing for approximately 300 metres.
This indicates the hours
(h) and minutes (min) since the ignition
was switched on.
Approximate distance in
km that can still be travelled if the same
driving style is maintained.
Approxi-
mate distance in km that can still be
travelled with the current level of the
AdBlue
® tank with the same driving style.
The indication appears from a range of
Current fuel consumption
Average fuel consumption
Travelling time
Operating range
Adblue Autonomy
or
Autonomy

less than 2,400 km and cannot be de-
activated.
2)
Distance covered in
km (m) after switching on the ignition.
The average speed will be
shown after driving for approximately
100 metres.
Current speed displayed in
digital format.
Displays a list of
the connected comfort systems that in-
crease energy consumption, e.g. air
conditioning.
Set a speed warning
●
Select the display
Speed warning at
--- km/h
or
Speed warning at --- mph
.
●
Press the button

on the windscreen
wiper lever or the button

on the multifunc-
tion steering wheel to store the current speed
and activate the warning.
● Activate: adjust to the desired speed within
5 seconds using the rocker switch

on the
windscreen wiper lever or by turning the
thumbwheel on the multifunction steering
wheel. Next, press the button

or

»
Distance travelled
Average speed
Digital speed
Convenience consumers
1) This will show all data on the display at the
same time: distance travelled, average con-
sumption, average speed and autonomy.
2) Not available in all countries.
109