133
Seats and storage
Removing or adjusting head restraints
The head restraints can be adjusted by moving them up and
down.
Fig. 91 Adjusting and re-
moving the head re-
straints
Adjusting height (front seats)
–
Press the button on the side and pull upwards to the desired
position.
–
To lower the head restraint, press the button and push head re-
straint downwards.
–
Make sure that it engages securely into position.
Adjusting height (rear seats)
–
Press the button on the side and pull upwards to the desired
position.
–
To lower the head restraint, press the button and push head re-
straint downwards.
–
Make sure that the head restraint engages securely in one of its
positions
⇒
page 14.
Angle adjustment (front seats)
–
Press the head restraint forward or back to the required posi-
tion.
Removing the head restraint
–
Push the head restraint up as far as it will go.
–
Press the button
⇒
Fig. 91
(arrow).
–
Pull head restraint out of fitting without releasing the button.
Fitting the head restraint
–
Insert the head restraint into the guides on the backrest.
–
Push head restraint down.
–
Adjust the head restraint to suit body size
⇒
page 14 and
⇒
page 13.
WARNING
●
Never drive if the head restraints have been removed. Risk of injury.
●
Never drive if the head restraints are in an unsuitable position, there
is a risk of serious injury.
●
After refitting the head restraint, you must always adjust it properly
for height to achieve optimal protection.
●
Please observe the safety warnings in
⇒
page 132, Correct adjust-
ment of head restraints.
Safety First
Operating Instructions
Practical Tips
Technical Specifications