Seat Alhambra 2019, Owner'S Manual

Page: 64 / 380

Emergencies
–
Place the bulb holder in the headlight and
pull the wire clip upwards until it clicks into
place.
–
Rotate the cover
›››
Fig. 64 in the opposite
direction to the arrow as far as it will go.
Always seek the help of a specialist when
changing the Xenon dipped beam and main
beam headlamps
›››
in Introduction on
page 59 .
Note
The illustrations show the left hand head-
light. The structure of the right hand side
headlight is symmetric.
Replacing the front bumper bulb
Fig. 66
On the right side of the front bumper:
disassembling the headlights.
Fig. 67
Changing the bulbs in the headlights
Complete operations only in the sequence
given:
–
Pull the cover forwards, in the direction of
the arrow
›››
Fig. 66 .
–
Unscrew the attachment screw
›››
Fig. 66
1
using the screwdriver from the vehicle
tool kit
›››
page 40 .
–
Tilt the headlight slightly forward and ex-
tract it from its lateral attachments
›››
Fig. 67 (small arrows).
–
Release the connector
›››
Fig. 67
1
and re-
move it.
–
Rotate the bulb holder
›››
Fig. 67
2
to the
left all the way, in the direction of the arrow,
and pull it out backwards together with the
bulb.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
rotate to the right all the way.
–
Insert the connector
›››
Fig. 67
1
on the
bulb holder
2
. The connector must audibly
click into place.
–
Place the headlight into its position
›››
Fig. 67 (small arrows) and tilt it back-
wards.
–
Tighten the attachment screw
›››
Fig. 66
1
using the screwdriver.
–
Replace the cover on the bumper
›››
Fig. 66 .
62