Seat Alhambra 2019, Owner'S Manual

Page: 63 / 380

Fuses and bulbs
C
Side light
–
Open the bonnet

.
–
Remove the rubber cover on the rear of the
headlight.
–
Pull the bulb holder
›››
Fig. 63
3
out back-
wards together with the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
insert completely.
–
Insert the rubber cover.
Note
The images show the left hand headlight
from behind. The structure of the right hand
side headlight is symmetric.
Replacing the xenon headlight
bulbs
Fig. 64
In the engine compartment: turn signal
cover.
Fig. 65
Turn signal bulb holder
1
and turning
light
2
.
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
1
Turn signal
–
Open the bonnet

.
–
Rotate the cover
›››
Fig. 64 in the direction
of the arrow and remove it.
–
Rotate the bulb holder
›››
Fig. 65
1
all the
way to the left and pull it out backwards to-
gether with the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
rotate to the right all the way.
–
Rotate the cover
›››
Fig. 64 in the opposite
direction to the arrow as far as it will go.
2
Cornering light
–
Open the bonnet

.
–
Rotate the cover
›››
Fig. 64 in the direction
of the arrow and remove it.
–
Press the wire clip downwards and pull the
bulb holder
2
›››
Fig. 65 out together with
the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
»
61