Seat 2015 LEON CUP RACER, Technical Manual, Page: 44 / 49

TECHNICAL MANUAL LEON CUP RACER
43 de 48
Gearbox & Slip differential service 5.6
Control routine before start:
 Check that there isn’t any oil leakage.

Operating range 70°C to 135°C.

Do not load the engine until the gear box temperature its upper to 70°C. (Control on the display
screen).
Routine maintenance:

Change the gear box oil and filter in the indicated mileage. (see mileage table)

Oil filter, as well as the rest of the gear box spare parts must be from VW group or SEAT Soport
original parts, detailed on the Leon Cup Racer parts catalogue.
 If there isn’t any oil leakage there is not necessary any level control. (paragraph 6)

Check the SEAT Sport seal is in good condition.
For more detailed maintenance or parts substitution information download yourself the “workshop manual”
from our web, “
www.seat-sport.com
”.
FDX - Slip differential control & service 5.7
Routine maintenance:

Change the FDX oil in the indicated mileage. (See mileage table). Use only the recommended oil.
 If there isn’t any oil leakage there is not necessary any level control.

Send to SEAT Sport for revision when recommended service mileage is reached.
Slip differential jobs Torque Remarks
FDX oil level check cap 15 Nm Change every time
a) FDX view
–level cap and seal–
b) FDX level cap
–bottom view–
How to change the FDX oil:
To replace the oil is recommended to disassemble the unit from the car.
Open the cap bellow and drain it and close it again. Measure the quantity and put in the same quantity.
If you are doing it mounted on the car, take care, 100 ml will not be possible to add from the cap (shown in
the picter “b” above). The last 100ml have to be add trough the venting pipe on top.
Notes:

In case of disassembling the unit from the car, the unit must be positioned in vertical position, as
it is shown in the picture, to avoid any oil leakage.