manualshive.com logo in svg

Seat 2014 LEON CUP RACER, Owner'S Manual

The Seat 2014 LEON CUP RACER Owner's Manual is a comprehensive guide that enables users to fully understand and maintain their vehicle. This manual covers all the essential information about the car's features, maintenance, and safety guidelines. Download this manual for free at manualshive.com to enhance your driving experience.

Share
Download
background image

Technical specifications

Note

In practice, and considering all the factors
mentioned here, consumption values can dif-
fer from those calculated in the current Euro-
pean regulations.

Weights

Kerb weight refers to the basic model with a
fuel tank filled to 90% capacity and without
optional extras. The figure quoted includes
75 kg to allow for the weight of the driver.

Special versions, optional equipment fittings
or retro-fitting accessories will increase the
weight of the vehicle 

››› 

.

WARNING

●

Please note that the centre of gravity may

shift when transporting heavy objects; this
may affect vehicle handling and lead to an ac-
cident. Always adjust your speed and driving
style to suit road conditions and require-
ments.

●

Never exceed the gross axle weight rating

or the gross vehicle weight rating. If the per-
missible axle load or the permissible total
weight is exceeded, the driving characteris-
tics of the vehicle may change, which could
lead to accidents, injuries and damage to the
vehicle.

Towing a trailer

Trailer weights

Trailer weight

The trailer weights and drawbar loads ap-
proved are selected in intensive trials accord-
ing to precisely defined criteria. The ap-
proved trailer weights apply to vehicles in the
EU and generally for maximum speeds of 80
km/h (100 km/h in certain circumstances).
The figures may be different in other coun-
tries. All data in the official vehicle documen-
tation takes precedence over these data at all
times 

››› 

.

Drawbar loads

The maximum permitted drawbar load on the
ball joint of the towing bracket must not ex-
ceed 

80 kg

.

In the interest of road safety, we recommend
that you always tow approaching the maxi-
mum drawbar load. The response of the trail-
er on the road will be poor, if the drawbar
load is too small.

If the maximum permissible drawbar load
cannot be met (e.g. with small, empty and
light-weight single axle trailers or tandem
axle trailers with a wheelbase of less than 1
metre), a minimum of 4% of the actual trailer
weight is legally required for the drawbar
load.

WARNING

●

For safety reasons, do not exceed the 80

km/h (50 mph) limit. This is also valid in
countries where higher speeds are permitted.

●

Never exceed the maximum trailer weights

or the drawbar load. If the permissible axle
load or the permissible total weight is excee-
ded, the driving characteristics of the vehicle
may change, leading to accidents, injuries
and damage to the vehicle.

Wheels

Tyre pressure, snow chains, wheel
bolts

Tyre pressures

The sticker with the tyre pressure values can
be found on the inside of the fuel tank flap.
The tyre pressure values given there are for
cold tyres. The slightly raised pressures of
warm tyres must not be reduced. 

››› 

Snow chains

Snow chains may be fitted only to the front
wheels, and only for the following tyres:

»

243

Tec

hnic

al s

pec

ific

ation

s

Adv

ic

e

Oper

ation

Saf

ety

The e

ssenti

al

s

Summary of Contents for 2014 LEON CUP RACER





























































































































































































































































































Reviews:

No comments

Related manuals for 2014 LEON CUP RACER

Acdeos AXS FL Installation Instruction preview
AXS FL
Brand: Acdeos Pages: 7
Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Brand: Conrad Pages: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Brand: Ford Pages: 200
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Safe Fleet PRIME DESIGN URX-001-E Manual preview
PRIME DESIGN URX-001-E
Brand: Safe Fleet Pages: 8
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Brand: Volvo Pages: 18
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12
VP Autoparts 419420 Installation preview
419420
Brand: VP Autoparts Pages: 2

Brands by name

Popular brands

Load more brands