Seat 2007 Cordoba, Owner'S Manual, Page: 122 / 258

Heating, Ventilation and Air conditioning 120
– Turn the fan control to one of the two levels depending on the
speed required.
– Rotate the temperature control to the desired level.
– Close outlets 3 .
– Open and turn outlets towards side windows.
Temperature selector
⇒
page 120
Blower control. There are four speed settings for the blower. The blower
should always be set at the lowest speed when driving slowly.
Air distribution control
⇒
page 120
Air recirculation button
⇒
page 121
Button – Coolant on button
⇒
page 120
WARNING
For your safety, the windows should never be fogged up or covered with
snow or ice. This is essential to ensure good visibility. Please familiarise
yourself with the correct operation of the heating and ventilation system,
including the demist/defrost functions for the windows.
Note
Please observe the general notes.
Vehicle interior heating or cooling system
Heating of the vehicle interior
– Disconnect the cooling system using button
⇒
fig. 91 (the
button light goes off).
– Turn the temperature selector to set the desired temperature.
– Turn the blower switch to one of the settings 1-4.
– Set the air distribution control to the air flow configuration
desired: (towards the windscreen), (towards the chest),
(towards the foot rest) and (towards the windscreen and
foot rest areas).
Cooling the passenger compartment
– Connect the cooling system with button (the button light
should light up).
A
3
A
4
A
A
A
B
A
C
A
D

A
E
AC
Fig. 91 On the instru-
ment panel: air condi-
tioning controls
AC
A
A
A
C
 
 
AC