Seat 2007 Cordoba, Owner'S Manual, Page: 118 / 258

Heating, Ventilation and Air conditioning 116
Heating, Ventilation and Air conditioning
Heating and ventilation
Controls
– Using the controls
⇒
fig. 87 and and with the switch
you can set the temperature, air distribution and the blower
speed.
– Press the button to switch air recirculation mode on or off. A
button is illuminated by a yellow lamp for as long as the function
is switched on.
Temperature
Switch sets the temperature. The required temperature inside the vehicle
cannot be lower than the ambient temperature. Maximum heat output, which
is needed to defrost the windows quickly, is only available when the engine
has reached its operating temperature.
Blower
The air flow can be set at four speeds with switch . The blower should
always be set at the lowest speed when driving slowly.
Air distribution
Control for setting the flow of air in the required direction.

– Air distribution towards the windscreen. Air recirculation is, for safety
reasons, not possible in this position.

– Air distribution to the upper body.

– Air distribution to footwell.

– Air distribution to the windscreen and the footwell.
Air recirculation mode

Air recirculation on (button symbol lights up) prevents strong odours
in the outside air from entering the vehicle interior, for example when driving
through a tunnel or queuing in traffic
⇒
.
When the outside temperature is low, using air recirculation mode provides
more effective heating by heating air from the vehicle interior instead of cold
air from outside.
WARNING
•
For your safety, the windows should never be fogged up or covered with
snow or ice. This is essential to ensure good visibility. Please familiarise
yourself with the correct operation of the heating and ventilation system,
including the demist/defrost functions for the windows.
Fig. 87 On the dash
panel: Heater controls
A
A
A
C
A
B
A
D
A
A
A
B
A
C
A
D
