SeaSTAR 3610, User Manual, Page: 21 / 76

SeaSTAR 3610 USER MANUAL
Issue 2.3 02/11
11
MENUS AND DISPLAYS
General
The 3610 DGNSS receiver has an internal display with two lines x 16 characters.
There are six buttons on the keypad;
ESC,

,

,

,

and

(Enter).
The

button is used to confirm user input and settings. It is also used to select a
page. The ESC button is used to exit pages without changing settings, while the
Arrow buttons are used to turn pages and to set parameters.
Pressing the
ESC and

buttons simultaneously for at least three seconds will reboot
the receiver.
There are two LED indicators on the 3610 DGNSS receiver, one green and one red.
The green LED indicator is lit when the unit is powered on. The red LED indicator is lit
or flashes when the 3610 DGNSS receiver unit has an alarm situation.
Figure 5. The 3610 DGNSS receiver front panel
There are seven main pages in the 3610 DGNSS receiver menu structure:
Status
menu, Set Pos/Ch menu, Port Cfg menu, Set GPS Sites menu, Set GLO Sites
menu, Display Cfg menu and About menu. In addition to the main pages, a Signal
status page (top level page) is displayed.
When the 3610 DGNSS receiver unit starts, the
Signal status page is displayed
showing indication of signal strength, satellite name and lock status.
On the display pages there are arrow indicators at the bottom right side of the display.
The arrows indicate the possibility to turn pages up or down.
Possible to turn page up or down
Possible to turn page down
Possible to turn page up
Step into sub-menu
►
1005600PMA0