SeaSTAR 3610, User Manual, Page: 17 / 76

SeaSTAR 3610 USER MANUAL
Issue 2.3 02/11
7
link), and receiver location entered via the display configuration menu or through the
GGA message via a GPS receiver.
In VBS mode, the RTCM data will appear on the output ports A and/or B or LAN.
Default port settings are initially configured, and will by default change based upon
the type of subscription. If different port settings are needed, the ports will need to
be set up to match the requirements of your GPS receiver RTCM ports. The
Port
Cfg menu item must then be used to set these parameters (see page 17).
For the VBS operation, the 3610 DGNSS receiver needs to be supplied with a
position for the area of operation. Insert the position via the Set Pos/Ch menu
(see page 16), or from a GGA message input at port A and/or port B.
In VBS mode, the VBS output must be enabled.
3610 receiver
GPS receiver
DGNSS antenna
DC power supply
A and/or B
PWR
ANT
LAN
Figure 3. Operating in VBS mode
1005600PMA0