background image

SeaStar Solutions

Don’t compromise performance... use genuine 

SeaStar parts only!

•  SeaStar helms 

•  SeaStar Cylinders

•  SeaStar hoses 

•  SeaStar Oil

Substituting non SeaStar parts in any part of the SeaStar hydraulic 
steering system, may seriously compromise system performance.

Keep our waters clean for all current and future users. Dispose of 

ALL fluids in accordance with your local regulations.

Throughout this publication, Warnings and Cautions (accompanied by the 

International Hazard Symbol 

)

 

are used to alert the manufacturer or 

installer to special instructions concerning a particular service or operation 

that may be hazardous if performed incorrectly or carelessly.

Observe Them Carefully!

These “safety alerts” alone, cannot eliminate the hazards that they  

signal. Strict compliance to these special instructions when performing the 

installation and maintenance plus “common sense” operation are major 

accident prevention measures.

Notice to Boat Manufacturer 

or Installer

Hazards or unsafe 

practices which 

COULD result in 

minor injury or 

product or property 

damage.

 

CAUTION

Hazards or unsafe 

practices which 

COULD result in 

severe personal 

injury or death.

 

WARNING

Immediate hazards 

which WILL result in 

severe personal 

injury or death.

 

DANGER

Information which is 

important to proper 

installation or 

maintenance, but is 

not hazard-related.

NOTICE

Cleaning fluids containing ammonia, acids or any other corrosive 

ingredients MUST NOT be used for cleaning any part of this 

Hydraulic Steering System. Failure to comply will cause serious 

damage to the steering system, resulting in possible loss of 

steering, causing property damage, personal injury and/or death.

 

WARNING

Summary of Contents for HA5471-2
























Reviews: