manualshive.com logo in svg

Sears CRAFTSMAN 944.604060, Owner'S Manual

Share
Download
Sears CRAFTSMAN 944.604060 Owner'S Manual Download Page 47

47

REPAIR PARTS

 

TRACTOR - - MODEL NUMBER 944.604060

MOWER DECK

KEY    PART
NO.     NO.                DESCRIPTION

KEY    PART
NO.     NO.                DESCRIPTION

 NOTE:

 

 

All component dimensions given in U.S. inches

             1 inch = 25.4 mm

50       72110612       Bolt, Carr.  3/8-16 x 1-1/2 Gr. 5
52       175820           Pulley Idler Flat
56       155986           Bar Adj. 
57       156941           Pin Head Rivet
90       74760516       Bolt Hex Head 5/16-18 unc x 1
91       180535           Bracket Asm N Roller RH
94       176066           Roller Nose 48"
95       180534           Bracket Asm N Roller LH
97       178515           Washer Hardened
98       179479           Spring Primary Drive
99       184058           Pulley Idler"V"
100     72110616       Bolt RD. HD. SQNK. 3/8-16 unc x 2
110     175016           Arm Spring Secondary
112     174387           Link Tension Relief Lever
113     72110506       Bolt RDHD. SQNK. 
                                 5/16-18 unc x 3/4
114     174384           Tension Asm Relief Lever
115     174609           Arm Spring Tension Relief
116     184219           Bolt, Shoulder
117     174873           Gauge Wheel, Rally
118     73930600       Nut, Centerlock  3/8-16 unc
119     19121414       Washer  3/8 x 7/8 x 14 Ga.
121     174371           Spring Secondary Drive
122     174606           Bushing Pivot Tension Relief
126     174372           Arm, Idler, Primary Deck 
130     17000616       Screw 3/8-16 x 1.0
180     73800500       Nut Lock Hex w/ins 5/16-18 unc
182     179127           Rod Nose Roller
183     163552           Retainer Spring
184     173979           Keeper Belt Idler
- -        174356           Mandrel Asm.  Service  

 

(Includes Key Nos. 13-15)

- -        181579           Replacement Deck, Complete (Std. 

Deck-Order separately nose roller 
components Key Nos. 90 - 95 and 
180 - 183.)

1         180358           Deck Weldment Mower  48
3         178915           Bracket Asm., Sway Bar
5         4939M            Retainer Spring
6         178024           Arm, Suspension, Rear (Sway Bar)
8         174365           Bolt 7/16 Asm. Blade
                                 (The following blades are available)
11       173921           Blade, 48" Mulching
                                 (For mulching mowers only)
- -        180054           Blade, 48" Hi-Lift
                                 (For bagging and discharging)
13       174360           Shaft Asm. 
14       174358           Mandrel Asm.
15       110485X        Bearing, Ball, Mandrel
16       174493           Stripper Mandrel Deck
17       72110610       Bolt RDHD Sq Neck 3/8-16 x 1.25
18       72140505       Bolt, Carriage  5/16-18 x 5/8
19       132827           Bolt, Hex Hd, Shoulder 5/16-18
20       174378           Baffl e, Vortex Mower 
21       73680500       Nut, Crownlock  5/16-18 unc
24       105304X        Cap, Sleeve 
25       178102           Spring, Torsion
26       110452X        Nut, Push
27       180655X428  Defl ector Shield
28       19111016       Washer  11/32 x 5/8 x 16 Ga.
29       131491           Rod, Hinge
30       173984           Screw, Thdroll 
31       187690           Washer, Spacer Mower Vented
32       173436           Pulley, Mandrel
33       178342           Nut, Flg. Top Lock Cntr.  9/16
37       177968           Pulley, Idler, 48" Primary
39       174375           Pulley, Idler, Driven
42       165723           Spacer, Retainer
43       174373           Arm, Idler Secondary
45       180806           Cover, Mandrel Deck
46       137729           Screw, Thdroll.  1/4-20 x 5/8
47       180808           V-Belt, Mower, Secondary
48       174368           V-Belt, Mower, Primary
49       73900600       Nut 3/8-16 unc

Summary of Contents for CRAFTSMAN 944.604060

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands