background image

3

PRODUCT SPECIFICATIONS

MAINTENANCE AGREEMENT

A Sears Maintenance Agreement is available on this prod uct.  
Contact your nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

•      Read and observe the safety rules.
•     Follow a regular schedule in maintaining, caring for 

and using your tiller.

•      Follow the instructions under “Maintenance” and “Stor-

 age” sections of this Owner’s Manual.

GASOLINE CAPACITY:     3 Quarts (2,8L) 

 

                                          Unleaded Regular

OIL (API-SG-SL):               SAE 30 (Above 32°F) 
(Capacity: 20 oz. [0.6L])     SAE 5w-30 (Below 32°F)

SPARK PLUG :                   Champion 

 

 

(GAP:  .030" [0.76mm])      RC12YC

CONGRATULATIONS 

on your purchase of a tiller. It has 

been designed, engineered and manufactured to give you 
the best possible dependability and performance.

Should you experience any problems you cannot easily 
remedy, please contact your nearest authorized service 
centre/department.  They have competent, well-trained 
technicians and the proper tools to service or repair this 
unit.

Please read and retain this manual. The instructions will 
enable you to assemble and maintain your tiller properly. 
Always observe the “SAFETY RULES”.

IMPORTANT:  

THIS UNIT IS EQUIPPED WITH AN INTERNAL 

COMBUSTION ENGINE AND SHOULD NOT BE USED ON 
OR NEAR ANY UNIMPROVED FOREST-COVERED, BRUSH-
COVERED OR GRASS COVERED LAND UNLESS THE 
ENGINE'S EXHAUST SYSTEM IS EQUIPPED WITH A SPARK 
ARRESTER MEETING APPLICABLE LOCAL OR STATE LAWS 
(IF ANY).  IF A SPARK ARRESTER IS USED, IT SHOULD BE 
MAINTAINED IN EFFECTIVE WORK 

ING ORDER BY THE 

OPERATOR.

SEE YOUR AUTHORIZED SERVICE CENTRE/DEPARTMENT 
FOR SPARK ARRESTER.  REFER TO THE REPAIR PARTS 
SECTION OF THIS MANUAL FOR PART NUMBER.

TABLE OF CONTENTS

SAFETY RULES ............................................................ 2
CUSTOMER RESPONSIBILITIES................................. 3
PRODUCT SPECIFICATIONS ....................................... 3
WARRANTY................................................................... 3
ASSEMBLY ................................................................. 4-5
OPERATION ............................................................... 6-9
MAINTENANCE SCHEDULE ...................................... 10

MAINTENANCE ..................................................... 10-12
SERVICE & ADJUSTMENTS ................................. 12-14
STORAGE .................................................................... 15
TROUBLESHOOTING ................................................. 16
REPAIR PARTS-TILLER......................................... 17-22
REPAIR PARTS-ENGINE........................................ 23-28
SERVICE/PARTS ORDERING................. BACK COVER

LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN TILLER

For Two (2) years from date of purchase Sears Canada, Inc. will repair or replace at Sears option free of charge parts which are 
defective as a result of material or workmanship.

COMMERCIAL OR RENTAL USE:

Warranty on Tiller will be thirty (30) days from date of purchase if used for commercial or rental purposes.

This Warranty does NOT cover:

1. Pre-delivery set-up.
2. Expendable items which become worn during normal use, such as tines, spark plugs, air cleaners, shear pins, and 

belts.

3. Repairs necessary because of operator abuse or negligence, including the failure to operate and maintain the 

equip ment according to the instructions contained in the Owner’s Manual.

Warranty service is available by returning the Craftsman Tiller to the nearest Sears Service Centre/Department in Canada. This 
warranty applies only while this product is in use in Canada.

This warranty is in addition to any statutory warranty and does not exclude or limit legal rights you may have but shall run concur-
rently with applicable provincial legislation.  Furthermore, some provinces do NOT allow limitation on how long an implied warranty 
will last so the above limitations may not apply to you.

SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8

Summary of Contents for 944.621534

































Reviews: