F. FAN MOTOR ASSEMBLY REMOVAL
NOTE:
To repair any of them, the Suction Guide Main ASS’Y
should be removed first.
1) Disconnect the wire lead from fan motor.
2) Remove the fan.
3) Remove the two screws holding the fan motor assembly to
the suction guide ass’y.
G. HIGH VOLTAGE TRANSFORMER REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the wire lead from magnetron, high voltage
transformer, and capacitor.
3) Remove the screw holding the high voltage transformer to
the base-plate.
H. REMOVING SENSOR
1) Disconnect the leadwire from PCB Assembly.
2) Remove a screw securing the sensor duct.
-17-
Figures 13
H.V.
Transformer
Figures 14
Figures 15
Summary of Contents for 721.62252200
