M
aurice Pincoffs Canada ©2013
8
STEP 4
Attach the Left pedal (5) to the left pedal tube (6). Secure in your desired position using two hex
head bolts (23) and two lock knobs (22). Repeat for the Right pedal (4).
Attach the stationary handlebar (13) with hand pulse (35) to the back of the upright (8). Secure
using two allen bolts (33) and two curve washers (34).
Insert the hand pulse wires (35) through the grommet (56) and pull it out from the hole on the
top of the upright (8), then connect the hand pulse wires (35) to the back of the monitor (14).
Connect the extension sensor wire (53) to the back of the monitor (14).
Attach the monitor (14) to the bracket of the upright (8). Secure using
four
screws (52) which
were pre-assembled on the back of monitor.
Note: It will be necessary to move the hand pulse wire (35) around the upright post and away
from the monitor bracket to avoid pinching the wires.
