P/N: E00SMT120VCO
Version
：
A/0
28
Figure 5-16
5.
6 Printing Out
5.6.1
Build-in Printer
5.6.1.1
Sample Test Report
The Figure 5-17 at the right shows the contents of a typical results
printout.
The heading of the results printout includes information such as
1)
hospital name, owner name, animal name, medical ID number,
sample ID number, age, animal type, blood type, operator ID
number, lab, disc lot number, disc and analyzer ID number, version
and test time.
The test results section of the card is printed in four columns:
2)
assay name, analyte concentration, reference range, and specified
units, as shown at right.
The deviation between the test value and the reference range will
be followed by “H” or “L” standing for higher than or lower than
reference range.
The sample indices are included at the bottom of the results
3)
printout.
WAT means “empty”cuvettes fills with diluent only, as a
control on the system cuvettes; EMP means “hollow” cuvette for
self test of analyzer and reagent disc; CHE means cuvette for
absorbance monitoring.
There are three degrees: “0” means good; “1” means acceptable;
“2” means non-acceptable; when there is number of “2”, please
contact our after-sales service team.
Figure 5-17
Instructions
