manualshive.com logo in svg

Sealite SLC500, Installation & Service Manual

Share
Download
Sealite SLC500 Installation & Service Manual Download Page 12

Latest products and information available at www.sealite.com

12

SL-C500 & SL-C600 

Solar Marine Lanterns

PC Configuration Tool

The lantern is pre-programmed to the customer’s specific requirements for convenience (eg. flash, 

intensity setting etc). 
The SL-155 Series are extremely intelligent lanterns with a number of features which can be 

programmed directly via a user-friendly computer program (as supplied on USB drive with every 

lantern). 
To change/update the settings of your lantern, please read the following instructions. 

1.  Run the Programming Software 

The programming software may be run directly from the USB drive provided, or you may copy the 

software to your computer hard-drive for future use. 

Running the Programming Software from the USB Drive

•  Connect the USB drive to your computer
•  Navigate to the USB drive folder & double-click the file called “LanternConfig.exe”. A new window 

will appear displaying the PC Configuration Tool.

Saving the Programming Software to Computer Hard-Drive

•  Connect the USB drive to your computer
•  Navigate to the USB drive folder
•  Copy the file called “LanternConfig.exe” and the “.dll” files
•  Navigate to the hard-drive location where you would like to save this program, and then right-

mouse-click and select “paste”. A copy of the programming software will now be saved to your 

computer hard-drive (to add the programmer to your computer desktop for ease of future access, 

right-mouse-click and select “Send to desktop”)

•  Double-click the file called “LanternConfig.exe”. A new window will appear displaying the PC 

Configuration Tool 

PLEASE NOTE:

 other documents have been saved on the USB drive for your information & 

convenience including the latest product specifications sheet and an electronic version of the 

installation and service manual. You may wish to view these documents to read more about the 

innovative features and benefits of the SL-155 Series of lanterns.

IMPORTANT:

 the Sealite PC Configuration Tool is designed for Windows Platforms only.

Programming the Lantern

Summary of Contents for SLC500













































Reviews:

No comments

Brands by name

Popular brands

Load more brands