Latest products and information available at www.sealite.com
22
SL-125 Series 5-9NM+ LED Marine Lantern
1
T/C
T/C
L
B
3
T/C
T/C
L
B
Storage Mode (Advanced users)
For situations where the lantern is put into storage and it will not have access to daylight, the IR
Remote control can be used to configure the lantern into Storage Mode.
You have four minutes to put it a dark environment otherwise it will exit this mode
The lantern will not respond to IR commands. To exit this mode, expose the lantern to daylight for at
least 15seconds.
The lantern will automatically enter Storage Mode if it has not detected any light for 20 hours.
Enter Storage Mode
By pressing the following key sequence the lantern will enter Storage Mode:
The lantern will leave storage mode when exposed to daylight or if the power switch is turned OFF and
ON again.
