13
f) Insert Inner Camera and close housing lid
Insert the inner
film
camera with the
power on
and lens open (power switch below the
lens). Make sure the Moisture Muncher or any other matter does not interfere with closing
the housing.
Power save function:
The power will turn off automatically, when the
camera is not used within about 2 to 3 minutes
and will turn on again by a light touch on the
shutter release.
Hold the latch down deep inside the strike
while closing. Do not use force.
Take a test picture. If
film
does not advance or FLASH READY light does not turn on, see
page 41 for Trouble Shooting Guide.
