85L WHEELBARROW
MODEL NO:
WB85
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Always distribute the load evenly over the surface of the wheelbarrow.
8
DO NOT
overload the wheelbarrow.
8
DO NOT
use wheelbarrow on uneven ground and
DO NOT
run over curbs or steps - use a ramp.
8
DO NOT
allow others to ride in the wheelbarrow.
8
DO NOT
use the wheelbarrow if any part is damaged, paying particular attention to the wheel.
8
DO NOT
inflate the tyre to more than 25psi.
2. INTRODUCTION
Manufactured from heavy-duty composite material. Ideal for a wide range of gardening and light construction tasks as well as general domestic
use. Constructed with strong tubular steel frame and rubber grip handles. Fitted with 405mm pneumatic tyre.
3. SPECIFICATION
Model No.: ................................................................... WB85
Capacity ........................................................................... 85L
Capacity (Weight) ........................................................ 150kg
4. CONTENTS
5. ASSEMBLY
NOTE:
Component package is wrapped in film and placed inside the
cross member of the frame (fig.1.2).
5.1.
FRAME AND PAN SUPPORT (fig.2)
5.1.1.
Carefully remove plastic wrapping from the frame.
5.1.2.
Carefully remove component package from cross member.
5.1.3.
The pan support arm (fig.1.3) is already engaged with the frame. This
will need adjustment at the final stage of assembly.
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Wear safety
footwear
fig.2
WB85 Issue 1 30/07/20
fig.1
