Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
VS8230,VS8231,VS8232 Issue: 1 - 27/11/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
INSTRUCTIONS FOR:
VIDEO BORESCOPE
Ø
9MM,5.5MM,3.9MM CAMERA
MODEL NOs:
VS8230, VS8231, VS8232
1. SAFETY
1.1.
General safety
9
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
Operate the tool in a well-ventilated work area.
8
DO NOT
operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
DO NOT
use the tool around corrosive chemicals which can damage the tool.
8
DO NOT
abuse the flexible cable. Never use the flexible cable to carry the tool.
8
DO NOT
drop the borescope, it is not shock proof.
9
Keep bystanders and children away while operating the tool.
9
Keep the tool dry, clean, free from oil, water and grease.
WARNING:
The handheld display unit is
NOT
waterproof.
9
Handle the borescope with care. If it is dropped, check for breakage and any other conditions which may affect its operation.
8
DO NOT
immerse the imager head and cable into corrosive substances, petroleum or oil.
8
DO NOT
use near moving machinery.
8
DO NOT
use excessive force to insert or withdraw the imager head or cable.
8
DO NOT
use the tool while tired or under the influence of drugs, alcohol, or intoxicating medication.
8
DO NOT
over-reach. Maintain proper footing and balance at all times.
8
DO NOT
use the tool for personal or medical use in any way.
1.2.
Charging safety
9
Use only the supplied charger.
9
Allow clearance all around the charger to allow cooling.
9
Disconnect the charger from the electrical supply when not in use.
8
DO NOT
charge in an explosive atmosphere or in the presence of flammable material.
8
DO NOT
leave camera unattended whilst recharging.
8
DO NOT
exceed the maximum charging time.
1.3.
The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator
.
2. INTRODUCTION
A
range of three high performance pistol grip borescopes with 85mm colour TFT screen, waterproof probe pod with IP67 rating. Each having the
same main unit, but with a choice of camera probe diameters (3.9mm, 5.5mm or 9mm).
Ø
3.9mm Camera is small enough to fit into a diesel combustion chamber through the glow plug hole.
Ø
5.5mm Camera gives extremely crisp image quality.
Ø
9mm Camera is ideal if restricted access isn’t an issue, is competitively priced, with crisp image quality.
A
ll units feature video record/playback, still images and stream live video via the AV out connection. Videos and images are stored on a 4GB
micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection. Also
features digital zoom control and rotate/flip control of image. Powered by lithium-ion battery pack giving up to 4 hours continuous use. AV and
USB cables not supplied.
