5. operatIoN
5.1.
Obtain a replacement for the broken stud or bolt first so that you know how deep to drill the pilot hole.
5.2.
use the size guide chart overleaf to select the correct combination of drilling guide, pin and hex driver. Where a stud or bolt has
sheared below the insertion surface select the largest drilling guide that fits into the hole as shown in fig.1A.
5.3.
Where a stud or bolt has sheared above the insertion surface select a drilling guide that fits closely over the stud as shown in figs.B&c.
5.4.
With the drilling guide in place, drill a hole into the stud into which the extraction pin can be hammered as shown in figs.D&E.
depending on the size of the stud it may be necessary to drill a
smaller pilot hole first which can then be enlarged to accept the
extraction pin.
5.5.
After drilling the stud, remove the drilling guide and clean away any
particles of metal left behind.
5.6.
Tap the extraction pin into the hole in the stud as shown in fig.1E.
5.7.
Place the correct hexagonal driver over the extraction pin as shown
in fig.1F. Apply a spanner to the hex driver to remove the bolt/stud.
5.8.
Pins 4 and 5 are for the removal of larger studs and have no
matching
drilling guides.
Note:-
in some cases where accessibility is an issue it may be
necessary to remove a component such as a cylinder head
from a vehicle.
Original Language Version
© Jack sealey limited
Vs7233.V2 issue1 01/02/18
sealey Group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
eNVIroNMeNt protectIoN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. please log on to
www.sealey.co.uk, email [email protected] or telephone 01284 757500
