instructions for
digital brake disc & drum caliper 150mm/6”
model no:
Vs0566
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFetY
WarNiNg! ensure Health and safety, local authority and general workshop practice regulations are adhered to when using
tools and equipment.
8
dO NOt
use gauge if damaged.
9
maintain gauge in good and clean condition for best performance.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep children and unauthorised persons away from the work area.
8
dO NOt
use the gauge for any purpose other than for which it is designed.
8
dO NOt
get gauge wet or use in damp or wet locations, or areas where there is condensation. Keep gauge clean and dry using a dry
cotton cloth only.
8
dO NOt
dip or submerge the gauge in any type of liquid.
8
dO NOt
expose gauge to bright sunlight or dust.
8
dO NOt
disassemble gauge. the gauge must be checked by qualified service personnel only.
8
dO NOt
apply any voltage to the gauge i.e. with an electric marker pen.
9
the gauge is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.
9
use gauge in reasonably constant temperature conditions of approximately 20°c.
9
When not in use, turn off and store gauge in a safe, dry, childproof location.
2.
iNtrOductiON
m
easures disc thickness (external) and small drums (internal). Hardened and tempered stainless steel calliper. 11mm High figures in LCD
display for ease of reading. metric or imperial read-out with ‘Hold’ function. Zero setting control allows for comparative measurement. supplied
with calibration certificate and storage case.
3. speciFicatiON
model no: .................................................................. Vs0566
range: .......................................................... 0-150mm (0-6”)
resolution: .......................................................0.01 (0.0005”)
Accuracy: ................................................± 0.02mm (±0.001”)
Battery: .............................................. sr44 - 1.5V (supplied)
Vs0566| issue:2 (l) 19/10/17
Original Language Version
© Jack sealey limited
refer to
instruction
manual