background image

For Jack Sealey Ltd. Sole UK importer of Sealey Professional Tools.

Declaration of Conformity  

We, the sole UK importer, declare that the product listed below is in conformity with the

following standards and directives.

The construction file for this product is held by the Manufacturer
and may be inspected, by a national authority, upon request to
Jack Sealey Ltd.

AUTOMOTIVE PEN PROBE 

DIGITAL METER

MODEL:

TA300

2006/95/EC Low Voltage Directive

2004/108/EC EMC Directive

93/68/EEC CE Marking Directive

2002/95/EC RoHS Directive

2002/96/EC WEEE Directive

Signed by Tim Thompson

31st August 2007

Environmental Protection.

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should 
be sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When product is no longer required, it must be disposed of in an environmentally protective way. 
Do not incinerate battery as it may explode when exposed to fire. 
Do not attempt to open battery.

TA300 - 1 - 310807

5.

MAINTENANCE

5.1.

BATTERY REPLACEMENT

5.1.1

To replace the batteries, remove the screw from the battery compartment cover, replace the old batteries with new 
batteries of the same type, replace the cover and reinstall the screw.

NOTE:  Pay attention to the polarity of the new batteries, do not reverse them, otherwise the unit will be damaged.

Only use the specified batteries: 2 x 1.5V AAA.

#

WARNING! DO NOT

attempt to repair or service your meter unless you are qualified to do so and have the relevant 

calibration, performance test, and service information. To avoid electrical shock or damage to the meter do not get water 
inside the case.

5.2.

Periodically wipe the case with a damp cloth and mild detergent. Do not use solvents.

5.3.

Turn the meter off when not in use and remove the batteries if stored for a long period of time.

5.7.

Do not store the meter in a place of high humidity or high temperature.

01284 757500

01284 703534

[email protected]

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

www.sealey.co.uk

Web

email

Available Parts.

Item

Part No.

Description

1.

TA300.01       

Lighter Clip  

2.

TA300.02       

Probe

3.

TA300.03      

Crocodile Clip

1

2

3

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this equipment. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be

required for any claim. 

INFORMATION:

For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and

address, including postcode.

Summary of Contents for TA300

Page 1: ...ow voltage supply Examples are measurements on domestic appliances portable tools etc DO NOT use the meter to measure within Measurement Categories lll and lV DO NOT use the meter around explosive gas vapour or dust Remove the test lead and probe from a circuit before opening the battery compartment DO NOT operate the meter with the battery cover removed When not in use store the meter carefully i...

Page 2: ...Accuracy 400mV 0 1mV 4V 1mV 0 8 4 40V 10mV 400V 100mV 600V 1V 1 4 RESISTANCE Range Resolution Accuracy 400Ω 0 1Ω 1 2 2 4kΩ 1Ω 40kΩ 10Ω 1 2 400kΩ 100Ω 4MΩ 1kΩ 1 2 2 40MΩ 10kΩ 1 5 2 CAPACITANCE Range Resolution Accuracy 4nF 1pF 25 5 40nF 10pF 400nF 100pF 4µF 1nF 10 5 40µF 1nF 100µF 100nF DUTY CYCLE Range Resolution Accuracy 0 1 99 0 01 2 5 4 DIODE Range Resolution Open circuit Voltage 1mV About 1 5V...

Page 3: ... 3 4 Read the reading NOTE The display will show the approximate value of the forward voltage drop of the diode If you connect the test probe and test lead across the diode in the wrong direction the display will show OL 4 4 TESTING FOR CONTINUITY 4 4 1 Set the function switch in position 4 4 2 Press the SELECT button to set the meter in range 4 4 3 Connect the test probe and test lead across the ...

Page 4: ...replace the cover and reinstall the screw NOTE Pay attention to the polarity of the new batteries do not reverse them otherwise the unit will be damaged Only use the specified batteries 2 x 1 5V AAA WARNING DO NOT attempt to repair or service your meter unless you are qualified to do so and have the relevant calibration performance test and service information To avoid electrical shock or damage t...

Reviews: