INSTRUCTIONS FOR
EAR DEFENDERS
MODEL No:
SSP18, SSP18F
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instruc-
tions and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! These ear defenders are of normal size range complying with BSEN352-1.
They are designed to fit the majority of wearers. If in doubt, seek professional advice.
3.1.
Extend the headband to maximum “open” position and place the cups over the ears with
the headband passing over the head.
3.2.
Settle the headband in position on the head while adjusting the height of the ear cups until
they feel comfortable and the headband rests on top of the head to support the muffs.
3.3.
The cushions should be a snug fit against the head.
3.4.
The pressure of the ear defenders against the head can be
adjusted too by bending the headband thereby ensuring
an effective noise seal.
2.1
When worn properly and given adequate care, the SSP18 and SSP18F provide excellent
protection which filters the high levels of noise that are encountered in an industrial
environment.
2. APPLICATION
1.1. GENERAL SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear at all
times during exposure to excess noise levels.
Before use, check that the ear defenders will provide the required level of noise attenuation.
Please see Attenuation table overleaf.
Inspect the ear defenders to ensure there are no tears or snags and that they are in good
condition.
1.2. PERSONAL PRECAUTIONS
Ensure there is another person within sight close enough to come to your aid should a
problem arise when working.
3. USE
SSP18F
Original Language Version
SSP18,SSP18F Issue: 2 - 18/07/11
