6. MAINTENANCE
p
WARNING!
Disconnect the saw from the mains power before changing accessories, servicing or performing any maintenance.
6.1.
Regularly clean the saw to remove dirt, dust and chips using a brush and cloths. Oil moving parts. If compressed air is used for cleaning
remember to wear protective goggles and keep other personnel at a safe distance.
6.2.
Ensure that motor vents are clear at all times.
6.3.
Clean plastic components with water and detergent, never use caustic or abrasive cleaners.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed below is in conformity with the following
standards and directives.
The construction file for this product is held by the Manufacturer and may
be inspected, by a national authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery.
8 COMPOUND MITRE SAW
MODEL SM8
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
98/37/EC Machinery Directive
93/68/EEC EC Marking Directive
Signed by Mark Sweetman
28th June 2001
7. DECLARATION OF CONFORMITY
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
E-mail:
Web address: www.sealey.co.uk
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No responsibility is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your name and address, including postcode.
SM8 - 2 - 160702
