sealey group, Kempson way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500
01284 703534
www.sealey.co.uk
envirOnment PrOtectiOn
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Bad, crooked or rough cuts.
1. feed pressure too great.
1. reduce feed pressure.
2. Blade guides are misaligned.
2. Adjust blade guides.
3. inadequate blade tension.
3. increase blade tension.
4. Blade is dull.
4. replace the blade.
5. incorrect speed.
5. Adjust the speed.
6. Blade guides are spaced out too far.
6. Adjust guide spacing.
7. Blade guide assembly is loose.
7. tighten the guide assembly.
8. Blade is too coarse.
8. Use a finer blade.
Blade is twisting.
1. Blade is binding in the cut.
1. reduce feed pressure.
2. Blade tension is too high.
2. decrease blade tension.
s
M65.V2 Issue 4 (H, F) 06/02/18
Original Language Version
© Jack sealey limited
