Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Original Language Version
© Jack Sealey Limited
S
M19.V3 Issue:1 17/06/22
5.3.
Open the lid, switch the pump on and hold the part to be cleaned under the nozzle, slowly rotate the component until clean.
8
DO NOT
leave the unit operating unattended.
5.4.
When clean, leave to drain on the tray or in a small component container until dry.
When cleaning is complete remove all parts whilst ensuring the minimum of cleaning agent spillage.
5.5.
Switch off the pump and close the lid and disconnect the power supply.
Note:
Any spillages should be mopped up immediately, so as not to cause a safety hazard. Dispose of waste liquids in accordance with
local authority regulations.
IMPORTANT:
The safety lever (4,5) incorporates a safety device in the form of a fusible link, which closes the lid in the event of fire. The
link is non-resetting and must be replaced should it be activated.
8
DO NOT prop the lid open as this will prevent the automatic safety feature from operating.
5.6.
When cleaning parts ensure that nothing in the tank, including any parts basket, is in a position that would prevent the lid from closing
fully if and when the fusible link activates.
6. MAINTENANCE
6.1.
Clean the pump filter regularly, by sliding it away from the pump housing and rinsing it in clean degreaser.
8
DO NOT
allow the level of liquid in the parts washer to fall below the pump inlet, as damage to the pump can result.
CLEAN, L
6.2.
6.3.
6.4.
