background image

• 3 •

WARNING! RISK OF ELECTRIC SHOCK OR FIRE.

1.1 

Read the entire manual before using this product. Failure to do so 

could result in serious injury or death.

1.2 

Keep out of reach of children.

1.3 

Do not put fingers or hands into any of the unit’s outlets.

1.4 

Do not expose the unit to rain or snow.

1.5 

Use only recommended attachments (SSL-JC jump cable). Use of an 

attachment not recommended or sold by Sealey for the SL69S may 

result in a risk of fire, electric shock or injury to persons or damage to 

property.

1.6 

To reduce the risk of damage to the electric plug or cord, pull by the 

adaptor rather than the cord when disconnecting the unit.

1.7 

Do not operate the unit with damaged cables or clamps.

1.8 

Do not operate the unit if it has received a sharp blow, been dropped 

or otherwise damaged in any way; take it to a qualified service 

person.

1.9 

Do not disassemble the unit; take it to a qualified service person when 

service or repair is required. Incorrect reassembly may result in a risk 

of fire or electric shock. 

WARNING! RISK OF EXPLOSIVE GASES.

1.10 

To reduce the risk of a battery explosion, follow these instructions and 

those published by the battery manufacturer and the manufacturer of 

any equipment you intend to use in the vicinity of the battery. Review 

the cautionary markings on these products and on the engine.

1.11 

Do not set the unit on flammable materials, such as carpeting, 

upholstery, paper, cardboard, etc. 

1.12 

Never place the unit directly above battery being jumped.

1.13 

Do not use the unit to jump start a vehicle while charging the internal 

battery. 

2.  PERSONAL PRECAUTIONS

WARNING! RISK OF EXPLOSIVE GASES. A SPARK NEAR THE 

BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE 

RISK OF A SPARK NEAR THE BATTERY:

2.1 

NEVER smoke or allow a spark or flame in the vicinity of a battery or 

engine.

2.2 

Remove personal metal items such as rings, bracelets, necklaces and 

watches when working with a lead-acid battery. A lead-acid battery 

can produce a short-circuit current high enough to weld a ring to 

metal, causing a severe burn.

2.3 

Be extra cautious, to reduce the risk of dropping a metal tool onto the 

battery. It might spark or short-circuit the battery or other electrical 

part that may cause an explosion.

2.4 

Do not permit the internal battery of the unit to freeze. Never charge a 

frozen battery. 

Summary of Contents for SL69S













Reviews: