Sealey SAC9002.V2, Quick Start Manual

Page: 3 / 6

SAC9002.V2 Issue 1 24/01/22
Original Language Version
© Jack Sealey Limited
5.3. WINDOW KIT ASSEMBLY
5.3.1. Locate window kit locking bracket’s threaded shaft through hole in window kit part B ( fi g.5).
5.3.2. Attach washer and wing nut to threaded shaft ( fi g.5).
5.3.3. Slide window kit part A into part B ( fi g 6) and locate locking bracket plate into central slot on part A ( fi g.5).
5.3.4. Extend the adjustable window kit to suit the size of the window and tighten the wing nut ( fi g.5) to lock.
5.3.5. Attach exhaust hose assembly, see section 5.2, to window kit part B ( fi g.6).
5.4. ATTACH WINDOW KIT ASSEMBLY
5.4.1. Open the window and place the window kit into position, then close the window onto the window kit ( fi g.7).
NOTE: To obtain maximum efficiency it is recommended that any gaps between the window kit and the sides of the window are
sealed.
5.4.2. Attach the hose connector on the hose assembly to the exhaust outlet ( fi g.1 #7) by sliding the it horizontally into position ( fi g.8).
5.4.3. Place the appliance near to a suitable electrical power outlet and adjust the fl exible exhaust hose to suit, avoiding any sharp bends
to the hose ( fi g.9).
5.4.4. Adjust the louvre panel ( fi g.1 #2) to suit ( fi g.9).
6. OPERATION
6.1. CONTROL PANEL AND DISPLAY
fi g.3
fi g.4
fi g.5
fi g.6
fi g.7
fi g.8
fi g.9
fi g.10
1 LOCK Press to turn ON or OFF the child lock function
2 MODE Press to switch operation mode between cooling,
dehumidifier and fan
3 UP Increase temperature (16ºC~32ºC) or timer setting
4 POWER Press to turn the unit ON or OFF
5 DOWN Decreasing the temperature or timer setting
6 SPEED Press to switch the fan speed between HIGH or LOW
7 TIMER Sets a time for the unit to automatically START or STOP
8 FAN SPEED
INDICATOR Displays HIGH or LOW fan speed
9 DIGITAL
DISPLAY Displays timer setting and room temperature
10 MODE
INDICATOR
Mode display between Cooling, Dehumidifying and Fan