instructions for
air filter regulators
model no:
sa2fr.v3, sa4fr/38.v2, sa5/rg/14.v2
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safetY
WarNiNg!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
WarNiNg!
disconnect the equipment from the air supply before changing accessories, servicing or performing any maintenance.
9
Keep the equipment clean and maintain it in good condition (use an authorised service agent).
9
replace or repair damaged parts. use genuine parts only. unauthorised parts may be dangerous and will invalidate the warranty.
WarNiNg!
ensure that the correct air pressure is maintained and not exceeded.
9
Keep air hoses away from heat, oil and sharp edges. check hoses for wear before each use and ensure that all connections are secure.
8
Do Not
direct air from the air hose at yourself, others or animals.
9
drain the compressor air tank daily. Water in the air line will damage your equipment.
9
When work is complete ensure that the air supply is turned off.
2.
iNtroDuctioN
Heavy-duty aluminium alloy valve assemblies - with integral filters and water traps (sA2fr and sA4fr/38). Air flow control knob can be
locked in position to prevent accidental adjustment of pressure. features gauge, marked in psi, bar and kg/cm
2
. individual compressed air
outlets are fitted with shut-off valve. suitable for direct mounting onto compressors or can be plumbed into air line runs.
3.
i
specificatioN
Part number
sA2fr.V3
sA4fr/38.V2
sA5/rG/14.V2
max. inlet/outlet pressure - psi/bar
174/12
174/12
174/12
Working pressure range - psi/bar
0-115 / 0-8
0-115 / 8
30-120 / 2 - 8.2
m
ax. flow rate - cfm @115 psi/8 bar
76
76
76
Ports:
inlet - BsP
1/2” (m)
3/8” (m)
1/4” (f)
outlet - BsP
1/4” x 2 (m)
1/4” x 2 (m)
1/4” (m)
sA2fr.V3, sA4fr/38.V2, sA5/rG/14.V2 issue 2 (H, f) 05/02/18
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Wear protective
gloves
Wear eye
protection
sa2fr.v3
sa4fr/38.v2
sa5/rg/14.v2
