Sealey SA22503, Instructions

Page: 4 / 4

NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Declaration of Conformity We, the sole UK importer, declare that the product listed below is in conformity with the following
standards and directives.
The construction file for this product is held by the
Manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole UK importer of Sealey Power Products.
DIRECT DRIVE COMPRESSOR
Models: SA22503
87/404/EEC Pressure Vessel Directive
89/336/EEC EMC Directive
73/23/EEC LV Directive
98/37/EC Machinery Directive
93/68/EEC CE Marking Directive
Signed by Mark Sweetman 18th MAY 2005
5.8. Scheduled maintenance table
6. TROUBLE SHOOTING
•
•
Internal & external
inspection of tank
•
General cleaning of
compressor
Check tube fittings and
electrical connections
•
•
Check for oil leaks
Replace air filter
•
Clean intake filter
•
•
•
Check oil level
•
Drain condensation
500 hrs. 200 hrs. 100 hrs. Daily
Maintenance
Operations
Replace oil
Check cut-out
Fault Cause Remedy
Pressure drop in the tank Air leaks at connections
Run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. Tighten connections showing leaks.
If problem persists contact Authorised Service Agent.
Pressure switch valve leaks when compressor is idle Non-return valve seal defective
Empty the air tank, remove the non-return valve cap
‘3’ (fig.6) and clean, or, if necessary, replace,
the seal ‘1 ’.
Compressor stops and does not restart Motor failure Contact Authorised Service Agent.
Compressor does not stop at max. pressure Pressure switch fault Contact Authorised Service Agent.
Compressor does not stop at max. pressure
Filter clogged
Head gasket or valve fault
Replace filter element.
Contact Authorised Service Agent.
Compressor noisy with metallic knock Bearing or piston damage Contact Authorised Service Agent.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
email
fig. 6
SA22503 - 1 - 17/05/05