Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
The relief valve adjustment has been modified or the valve leaks.
8.4.
RELIEF VALVE (4)
8.4.1. Regulators are equipped with an excess pressure valve.
8.4.2.
In case of malfunctioning, this valve allows the excess gas pressure to escape.
CAUTION!
DO NOT
modify the calibration of the relief valve.
8.5.
CHECKING THE SEAL
8.5.1. This check must be carried out only in the open air: use either soapy water or a gas leak detector.
DO NOT
use flames.
8.5.2.
Spray detector on the area to be checked.
8.5.3. The forming of bubbles or foam is a sign of a leak. If a leak is detected remove regulator from service immediately and have it
serviced by an authorised stockist.
Original Language Version
© Jack Sealey Limited
R
EG/MO.V2, REG/MT.V2 Issue:2 (H,F) 06/05/21
