5. SET UP
5.1.
PUT INTO SERVICE / STARTING UP
5.1.1.
Push the high pressure hose into the pressure gun, until it clicks. See fig.2.
5.1.2.
To release the high pressure hose, press the button as indicated in fig.2.
NOTE:
Make sure the connectors are aligned correctly.
5.1.3.
Check the secure connection by pulling on the high pressure hose.
5.1.4.
Screw the coupling element to the water connection on the appliance. See fig.3.
5.1.5.
Attach the water supply hose to the coupling on the water connection.
NOTE:
The supply hose is not included.
5.1.6.
Connect the ‘water supply hose’ to the water supply.
5.1.7.
Completely open the water tap.
5.1.8.
Insert the mains plug into the socket.
5.1.9.
Turn on the appliance “I/ON”.
6. OPERATION
6.1.
LOCKING AND UNLOCKING THE TRIGGER LEVER
6.1.1.
Unlock the trigger lever on the pressure gun.
6.1.2.
Pull on the trigger lever of the pressure gun; the device will switch on.
6.1.3.
Switch the appliance on for a (max. of 1 minute) and wait until the water exits at the hand spray gun without bubbles, (see fig.5).
fig.2
fig.3
fig.4
fig.5
P
W1601 Issue 1 20/11/2020
Original Language Version
© Jack Sealey Limited
