background image

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: 

no liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole Uk Distributor, Sealey group, 

Kempson Way, suffolk Business Park

Bury st. Edmunds, suffolk,
IP32 7Ar

www.sealey.co.uk

W e b

email

 

  

Environmental Protection.

  

recycle unwanted materials instead of disposing of them as  

  

waste. All tools, accessories and packaging should be sorted,  

  

taken to a recycle centre and disposed of in a manner which  

  

is compatible with the environment.

  

WEEE Regulations.

  

Dispose of this product at the end of its working life in compliance   

  

with the Eu Directive on Waste Electrical and Electronic Equipment.  

  

When the product is no longer required, it must be disposed of in an  

  

environmentally protective way. contact your local solid waste   

  

authority for recycling information.

Original Language Version

© Jack sealey Limited

PW1360   Issue: 2 - 17/01/14

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to 

www.sealey.co.uk, email [email protected] or phone 01284 757500.

Summary of Contents for PW1360






Reviews: