background image

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call 

our technical team on [email protected] or 01284 757505.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 

waste authority for recycling information.

P

C300SD.V3  Issue:4 (F) 19/08/20

Original Language Version

© Jack Sealey Limited

Summary of Contents for PC300SD.V3

Page 1: ...e to the live terminal L B Connect the BLUE neutral wire to the neutral terminal N C After wiring check that there are no bare wires and ensure that all wires have been correctly connected Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight 8 DO NOT connect either wire to the earth terminal Sealey recommend that repairs are carried out by a qualifi...

Page 2: ...shaft then insert rear wheel K on the shaft Insert the lock pin R into the hole on the end of the shaft to lock the wheel 5 7 Snap the hub cap O on to the wheel Repeat the same steps at the other end of the shaft fig 2 5b 5 8 For wet vacuum cleaning fit the supplied foam filter fig 2 7 5 9 For dry vacuum cleaning use the cartridge filter supplied fig 2 6 NOTE DO NOT operate the cleaner without a c...

Page 3: ...is turned off fig 5 2 and plug in the power supply fig 5 3 8 3 Switch on the power position I fig 5 4 8 4 The unit will now blow through the hose and can be used to clear obstructions within the pipe fig 5 5 WARNING If after a few seconds the hose is still blocked turn of the unit and clear the hose manually 9 MAINTENANCE 9 1 GENERAL MAINTENANCE 9 1 1 Ensure the machine is unplugged from the power...

Page 4: ... reserve the right to alter data specifications and component parts without prior notice Please note that other versions of this product are available If you require documentation for alternative versions please email or call our technical team on technical sealey co uk or 01284 757505 Important No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchas...

Reviews: