5.2.
Emptying dust tank
.
(fig.4)
5.2.1.
Turn off cleaner and disconnect from power supply. (fig.4.2) (fig.4.3)
5.2.2.
Release side clips (fig.4.4) and lift off top assembly and filter
assembly. (fig.4.5) (fig.4.6)
5.2.3.
Carefully empty contents of cleaner body into suitable receptacle. (fig.4.7)
5.2.4.
Separate filter assembly and clean off (brush gently or shake) into
suitable receptacle. (fig.4.8)
5.2.5.
Reassemble filter and replace into cleaner body. (fig.4.9) (fig.3.6)
5.3.
Wet vacumming. (fig.5)
5.3.1.
Ensure machine is disconnected from power supply.
5.3.2. ` Remove HEPA filter from filter arrangement.
5.3.3.
Check that filter components are assembled correctly. (fig.5.1)
5.3.4.
Install filter assembly into cleaner body. (fig.5.2)
5.3.5.
Install top assembly and lock in place. (fig.5.3)
5.3.6.
Connect to power supply and power on. (fig.5.4) (fig.5.5)
5.3.7.
When maximum capacity is reached the machine will stop running. (fig.5.6)
5.3.8.
Turn off the power and disconnect from the power supply. (fig.5.7) (fig.5.8)
5.3.9.
Unscrew drain cover and carefully empty contents of cleaner body int
o
suitable receptacle. (fig.5.9)
Original Language Version
© Jack Sealey Limited
fig.4
P
C300BL Issue 2 (2,3) 7/3/19
