PC1950 - 1 - 190105
www.sealey.co.uk
01284 757500
01284 703534
Web
Sole UK Distributor, Sealey Group
, Bury St. Edmunds, Suffolk.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed here is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a
national authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Power Products.
Signed by Mark Sweetman
19th January 2005
PRESSURE WASHER - 1450PSI
Model: PC1950
89/392/EEC Machine Directive
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
2000/14/EC Sound Pressure Directive
93/68/EEC Marking Directive
p
WARNING!
Ensure the pressure washer is switched off and unplugged from the mains electrical power supply and turned off at the
mains water tap before performing any maintenance tasks.
7.1
REGULAR MAINTENANCE
7.1.1 Check, clean or renew the inlet filter (which is fitted inside the hose connector, see contents, item 6) after every 50 hours of use.
7.1.2 Ensure that both nozzles are kept clean and free of debris.
7.1.3 Check unit, lance, detergent bottle, hose, connections and cables for damage. Immediately replace or repair with genuine parts.
7.2
STORAGE
7.2.1 Store unit in blow mould case provided.
7.2.2 Do not store the unit in premises subject to freezing conditions. If this cannot be guaranteed then the unit should have a
glycol based antifreeze run through it.
7.2.3 Immerse the water supply pipe into a container of antifreeze.
Immerse the lance into the same container (without the nozzle attached).
Hold the gun trigger open and start the unit.
The antifreeze will be drawn into the unit by suction. When an even, bubble free flow is obtained switch the unit off.
7. MAINTENANCE
