3. SPeciFicatiOn
Feature
Pc102
Pc102Hv
motor Power
1000W
1000W
supply
230V
230V
A
irflow
78mtr
3
/hr
78mtr
3
/hr
drum size
10ltr
10ltr
drum type
Plastic
Plastic
W
eight
4.1kg
4.1kg
V
acuum Accessories dia.
32mm dia.
32mm dia.
filter type
cloth
cloth
m
aximum Vacuum Pressure
null
null
consumable Parts
P
C102CF - Washable Cloth
P
C102CF - Washable Cloth
replacement Parts
null
null
optional Accessories
null
null
colour
r
ed and Black
G
reen and Black
4. aSSembly
4.1.
ensure the mains plug is disconnected.
4.2.
Undo two side clasps (see fig.1) by squeezing them towards body and lift off top assembly.
4.3.
remove any contents from inside the body of the machine.
4.4.
Turn the body upside down and press-fit castors.
4.5.
Stand body upright and fit Air Inlet connection into side of body. Take care to aim nozzle downwards towards to the base (fig.1)
4.6.
Fit washable cloth filter inside ensuring full seating with rim of body.
4.7.
Crimp side clasps (see fig.1) and lower top assembly into place ensuring fixing and firm mounting.
4.8.
Attach suction hose assembly to air inlet connection (quarter turn locking).
4.9.
Attach desired nozzle to suction hose.
5. OPeratiOn
warninG!
Ensure you read, understand and apply Section 1 ‘Safety Instructions’. Reminder:
remove plug from power supply
before opening unit. dO nOt vacuum solvents, explosives, inflammable and/or hazardous liquids such as petrol, oil, spirits,
paint, thinners, acids etc.
5.1.
dry vacuum cleaninG
5.1.1.
ensure machine is unplugged from the power supply.
5.1.2.
Ensure clean and dry filter is fitted internally (see section 4.6).
5.1.3.
Attach suction hose assembly to air inlet connection in body (quarter turn locking).
5.1.4.
Attach desired nozzle to suction hose.
5.1.5.
Connect cleaner to power supply, press start switch to ‘On’ position.
5.1.6.
When vacuuming is completed press start switch to ‘Off’.
5.1.7.
See Section 6 for emptying and cleaning instructions.
5.2.
wet vacuum cleaninG
5.2.1.
ensure machine is unplugged from the power supply.
5.2.2.
Ensure clean and dry filter is fitted internally (see section 4.6).
5.2.3.
Attach suction hose assembly to air inlet connection in body (quarter turn locking).
5.2.4.
Attach desired nozzle to suction hose.
5.2.5.
Connect cleaner to power supply, press start switch to ‘On’ position.
5.2.6.
When vacuuming is completed press start switch to ‘Off’.
5.2.7.
See section 6 for maintenance and cleaning instructions.
note:
to vacuum large quantities of liquid from a sink or tank etc.
dO nOt
immerse the nozzle completely in the liquid but leave
a gap at the top of the nozzle opening to allow an air flow. the machine is fitted with a float valve that stops the suction when the tank
has reached its maximum capacity. When the tank is full the user will notice an increase in motor speed and machine note. When this
happens turn off the machine off, disconnect from the power supply, remove the machine head and empty the liquid from the body into
a suitable receptacle or drain. to continue vacuuming refit the head and continue. After wet vacuuming turn the machine off and unplug
from the power supply. empty the container into a suitable receptacle or drain, clean and dry the inside and outside before storage. clean
and dry the cloth filter as per section 6 instructions.
5.3.
blOwinG
5.3.1.
ensure machine is unplugged from the power supply.
5.3.2.
Ensure clean and dry filter is fitted internally (see section 4.6).
5.3.3.
Attach suction hose to the output connection in machine head (quarter turn locking) (see fig.1).
5.3.4.
Connect cleaner to power supply, press start switch to ‘On’ position.
5.3.5.
the unit will blow through the hose and can be used to clear obstructions within the pipe.
warninG!
If after a few seconds the hose is still blocked switch off unit and clear the hose blockage manually.
Original Language Version
© Jack sealey limited
P
C102, PC102HV Issue 1 12/12/17
side clasp
Air inlet
output
connection
(on far side)
fig.1
