background image

  10.  TROUBLESHOOTING

  9.   CONSUMABLES

IMPORTANT! IF THE MACHINE IS USED WITHOUT A FILTER FITTED THE MOTOR WILL BURN OUT EVENTUALLY AND YOUR 

GUARANTEE WILL BE INVALIDATED. ALWAYS KEEP A SPARE FILTER HANDY.

Replacement Cloth Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC100.ACC4 

Replacement Foam Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC100.ACC2 

Cleaner will not operate.

Dust comes from the motor cover.

Reduced efficiency and increased

motor speed/vibration.

No power supply.

Faulty power cable, switch or motor.

Container full of liquid.

Filter missing or damaged.

Container full.

Filter clogged.

Nozzle, hose or container inlet blocked.

Check supply.

Check and repair or replace faulty item.

Empty container.

Fit or replace filter.

Empty container.

Replace or clean filter (See maintenance)

Check nozzle, hose and container inlet for blockage.

 8. MAINTENANCE

8.1  GENERAL MAINTENANCE.

8.1.1  Ensure the machine is unplugged from the power supply.

8.1.2  Disconnect the hose from the container.

8.1.3  Rotate the locking knobs and remove the power head from the  

 container.

8.1.4  Clear out any dirt or debris from the container and hose.

8.1.5  Clean the foam filter or reusable cloth filter by washing it in a  

 

mild soapy solution. The cloth filter should be thoroughly dry  

 

before it can be used again.

8.1.6  Check that the hose and attachments are undamaged and also 

 

check the power cable. Any damaged parts should be replaced  

 immediately.

  

PC100    Issue: 3(L) - 11/08/16

 © Jack Sealey Limited

Original Language Version

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

 

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be 

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on 

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed

of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Summary of Contents for PC100

Page 1: ...ectricity at Work Act 1989 requires that all portable electrical appliances if used on business premises are tested by a qualified electrician using a Portable Appliance Tester PAT at least once a year 1 1 2 The Health Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of those appliances and the safety of the appliance operators If in any doubt about ...

Page 2: ...y vacuuming fit the reusable cloth filter over the filter cage 4 5b For wet vacuum remove the cloth filter and put the foam filter over the filter cage NOTE Do not operate the cleaner without any filter fitted as this will damage the motor and invalidate your warranty 4 6 Replace the power head onto the container ensuring that it is correctly seated 4 7 Secure the head by turning the locking knobs...

Page 3: ...oth filter and fit the foam filter over the filter cage replace the top section onto the container 6 3 To the same flexible hose as used in dry cleaning fit the desired nozzle 6 4 Ensure the switch is Off position 0 before plugging into the power supply 6 5 Press the switch to On position I 6 6 After use empty the tank and dry To vacuum large quantities of liquid from a sink or tank etc do not imm...

Page 4: ...achments are undamaged and also check the power cable Any damaged parts should be replaced immediately PC100 Issue 3 L 11 08 16 Jack Sealey Limited Original Language Version NOTE It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice IMPORTANT No liability is accepted for incorrect use of this product ...

Reviews: