8
DO NOT
operate sander if any parts are damaged or missing. This may cause fail
ure and/or injury.
WARNING! DO NOT
sand any materials containing asbestos.
8
DO NOT
carry the sander by the electrical cable.
8
DO NOT
use sander with water, get the sander wet or use in damp or wet locations, the sander is for dry use only.
8
DO NOT
operate sander if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT
use where there are flammable liquids, solids or gases such as paint solvents or waste wiping or cleaning rags.
8
DO NOT
leave the sander running unattended.
8
DO NO
T carry the sander with your finger on the power switch.
9
When not in use disconnect from power supply and store in a safe, dry, childproof area.
LEAD PAINT WARNING!
Paint once contained lead as a traditional ingredient. The dust from the removal of such paint is toxic if inhaled or ingested and must,
therefore, be avoided. The following action must be taken before using the sander on a surface that you suspect may have contained
lead in the paint.
1.
User must determine potential hazard relating to age of paint to be removed. (Modern paints do not contain lead).
2.
DANGER!
Keep all persons and pets away from the work area. The following are particularly vulnerable to the effects of lead paint dust:
Expectant women, babies and children.
3.
We recommend personal protection by using the following safety items:
a
) Paint Spray Respirator (Sealey ref: SSP1699)
b
) PE Coated Hooded Coverall (Sealey ref: SSP266)
c
) Latex Gloves (Sealey ref: SSP24)
4.
Take adequate measures to contain the paint dust, flakes, and scrapings.
5.
Continue to wear safety equipment as in 3 above, and thoroughly clean all areas when task is complete. Ensure that paint waste is
disposed of, in sealed bags or containers, according to local authority regulations.
2. INTRODUCTION
5mm Orbit designed specifically for use on car body work repairs. Six stage variable speed control from 4000-10000rpm. Ergonomic
rubberised gear head casing for added comfort and grip during use. Fitted with 5m mains cable. Supplied with Ø150mm hook and loop
backing pad, spare brushes and hex key.
3. SPECIFICATION
Model No:
.....................................................................
OS400
P
ad Size:
....................................................................Ø150mm
Motor Power: ...................................................................
400W
Supply: ............................................................................. 230V
No Load Speed: .............................................. 4000-10000rpm
O
rbit Size:
.......................................................................Ø5mm
W
eight: ...........................................................................2.01kg
T
hread size
....................................................................... M8
Noise power ..............................................................
88dB(A)
Noise pressure ..........................................................
77dB(A)
Vibration ..................................................................... 3
.6m/s²
U
ncertainty ....................................................................
1.5m/s²
4. OPERATION
WARNING!
Before use, ensure that you have read and understood Section 1 Safety Instructions.
NOTE:
The sander is designed for dry use only.
DO NOT
use with water or any other liqui
4.1.
INSTALL HOOK AND LOOP BACKPLATE
4.1.1.
With the tool unplugged from the power supply, place it on a tool rest with the spindle upright.
4.1.2.
Firmly attach backplate to the machine spindle using bolt and hex key supplied while ensuring engagement of hexagonal spindle.
4.1.3.
Attach sanding disc to backing plate ensuring it is centred. If using sanding discs with holes, align the holes on disc and backing
plate to aid dust extraction.
4.2.
STARTING AND STOPPING
4.2.1.
Plug the sander into the power supply.
4.2.2.
The sander has a six position speed controller numbered 1 to 6 offering speeds from 4000 to 10,000 RPM (fig.1).
4.2.3.
Set speed control to required value and pull the trigger to start. To stop the machine release the trigger.
4.2.4.
For continuous operation press the switch lock button to lock the
trigger (fig.1). Pull the trigger again to stop the tool.
4.3.
DUST COLLECTION
4.4.
The sander is equipped with a multi-holed backing plate.
4.4.1.
Dust collection can be enhanced by use of sanding discs with
corresponding holes.
4.4.2.
Align the holes when attaching sanding disc to the backing plate.
4.4.3. The sander has a self-vacuum function which, when connected
to either a dust collection bag or vacuum cleaner, can improve
dust collection. (Rubber connector supplied),
Original Language Version
© Jack Sealey Limited
O
S400 Issue 1 10/04/19
fig.1
