1 - Single phase mains input, rectifier and condenser.
2 - Transisters and drivers switching bridge (IGBT). Converts rectified mains into high frequency (40kHz) AC and permits power regulation according to the
current/voltage requirement of the weld.
3 - High frequency transformer adapts voltage and current to the values required and also isolates the mains from the welding circuit.
4 - Secondary rectifier bridge with inductance which changes the AC into a continuous current with a low wave-length.
5 - Electronics, which compare the value of the welding current against that selected by the operator and modulates it via the IGBT drivers. Also includes the
safety system.
6. ELECTRICAL SCHEMATICS
01284 757500
01284 703534
E-mail:
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds,
Suffolk.
MW145.V2 - 1 - 120505
