4. operation
4.1.
connect the usB lead to the socket on the rear of the lamp. Plug into usB power supply and turn on, the
charging LED (fig.2.) on the lamp will light RED to show that charging has commenced.
4.2.
When the battery has fully charged the LED will turn GREEN.
4.3.
direct the lens away from your eyes before switching on.
4.4.
Toggle the lamp between the end light and side light using the ON/OFF switch, (fig.1). First press = end light on,
second press = side light on full power, third press = side light on low power.
4.5.
the lamp may be suspended by the hooks or attached to any ferrous surface by using the magnets.
4.6.
When the light is hanging from the hook it can be rotated through 360° for more precise positioning.
4.7.
separate the top and bottom sections by pulling apart. When attached to a ferrous surface, using the base magnet, the lamp can
be rotated to shine in any direction.
fig.1
fig.2
battery removal
remove the 6 screws on the back of the lamp. remove the back casing and disconnect the wiring from the circuit
board. remove the battery. dispose of according to local government guidelines
.
under the Waste batteries and accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
environmental protection
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal
dispose according to local regulations.
Weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important:
no liability is accepted for incorrect use of this product.
Warranty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
s
ole UK Distributor, Sealey Group.
kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
i
P32 7AR
www.sealey.co.uk
01284 757500
01284 703534
Web
hooks
l
ED3602 SERIES| Issue 1 04/04/17
Original Language Version
© Jack sealey limited
