8
DO nOt
carry the wrench with your finger on the power switch, or carry by the power cord, or leave the wrench running whilst
unattended.
9
When not in use switch wrench off, remove plug from power supply, clean the wrench and store in safe, dry, child proof area.
2.
i
intrODuctiOn
Powerful, ergonomic and capable of removing the most stubborn of wheel nuts. Produces up to 300Nm (222lb.ft) of torque in both
directions. Fitted with a 2mtr heavy-duty rubberised cable. Features a rubber grip for added comfort and forward/reverse rocker switch.
Supplied in a carry case with four impact sockets (17mm, 19mm, 21mm, 22mm).
3.
i
SpeciFicatiOn
model no: ..................................................................
IW230V
drive: .................................................................
1/2” Square
Impact rate: .............................................................
5000bpm
maximum Torque ...........................................
300Nm(222lb.ft)
no load speed ..........................................................
2600rpm
W
eight ......................................................................... 3.37kg
V
ibration ................................................................
10.04 m/s
2
U
ncertainty .................................................................
1.5m/s
2
noise Power .................................................................
100dB
noise Pressure ..............................................................
89dB
.......................................................................
aSSembLY3.37
4. OperatiOn
warninG!
ensure that you read, understand and apply the
safety instructions before use.
4.1.
using the wrench.
4.1.1.
Use only impact sockets which are specifically designed
for use with an impact wrench. The use of normal chrome
vanadium sockets is dangerous, since these are more brittle
and are liable to shatter.
4.1.2.
Fit the socket to the wrench by snapping it onto the square drive (fig.1).
4.1.3.
Select the required direction of rotation using the rocker-type trigger switch. To change rotation direction, depress rocker switch
(fig.1) up or down. Familiarise yourself with this operation before use.
8
DO nOt
attempt to change the direction of rotation whilst in motion.
4.1.4.
When tightening, release the trigger as soon as the impact sound is heard. Take care to not over-torque small fixings.
nOte:
on critical fixings, final tightening should be carried out using a torque wrench, setting it according to the product or the vehicle
manufacturer’s specifications.
5. maintenance
5.1.
cleaning.
5.1.1.
Keep the outer case of the wrench clean and free from grease
8
DO nOt
wash with water or use solvents or abrasives, use a damp cloth only.
5.1.2.
For any other service or maintenance, contact your Sealey stockist.
Original Language Version
© Jack Sealey limited
Sealey Group, Kempson way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
enVirOnment prOtectiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
weee reGuLatiOnS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
fig.1
I
W230V Issue 2 (3) 09/08/18
