5. assemblY
5.1.
Lay the folder main frame (fig 1. A) on the floor with the top folding plate (fig1.1) uppermost.
5.2.
Attach the foot stand (3) to the legs of the main frame (A) using the nuts, bolts and washers supplied. The foot stand cross bar (3)
must be facing uppermost when the main frame is on the floor.
5.3.
ensure the support brackets (4) are secured to the outside of the main frame legs and the outside of the foot stand.
5.4.
fully tighten all nuts and bolts.
5.5.
Attach the top plate using the L-shaped set screws (2).
5.6.
Raise assembled folder to upright position so the foot stand cross bar (3) and lift top folding plate (1) are to the front of the unit.
6. operation
6.1.
screw the two adjusting nuts (B) down to ensure the folding plates (c) are parallel. this my require further adjustment from time to
time.
6.2.
insert a test piece of sheet metal in the folder.
6.3.
secure the metal between the folding lips by tightening the two clamps, whilst ensuring there is even pressure on both ends.
6.4.
Place your foot on the base cross bar (3).
6.5.
raise the top folding plate (1) to create the fold. from this test, you will be able to determine how and where the fold appears.
6.6.
When satisfied with the test results, proceed with the actual workpiece.
6.7.
Repeat the above steps 3.2 - 3.5 for each new workpiece.
sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
enVironment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
df910.V2| issue:2 (l) 25/10/17
Original Language Version
© Jack sealey limited
fig.1
