4. MAINTENANCE
5. DECLARATION OF CONFORMITY
4.1.
CLEANING
Keep the outer case of the wrench clean and free from grease. DO NOT wash with water or use solvents or abrasives.
For any other service or maintenance, contact your authorised service agent.
p
p
WARNING! Ensure you read, understand and apply safety instructions before use.
3.2.
USING THE WRENCH
3.2.1. Use only impact sockets which are specifically designed for use with an impact wrench. The use of normal chrome vanadium sockets
is dangerous since these are more brittle and are liable to shatter.
3.2.2. Fit the socket to the wrench by snapping it onto the square drive (fig 1.1). Note that there is a 3/8-1/2 drive adaptor supplied, enabling
both 3/8 and 1/2 drive sockets to be used.
3.2.3. Fit the battery pack to the wrench.
3.2.4. Select the required direction of rotation. To change direction, push switch (fig. 1.2) to the left or right. Familiarise yourself with this
operation before use. DO NOT attempt to change the direction of rotation whilst operating trigger is depressed.
Use the same switch to lock off the trigger by placing the switch in the middle position.
3.2.5. Place the socket over the nut/bolt and depress the trigger (fig. 1.5) to operate the wrench.
The speed of the wrench is controlled by the trigger. Squeeze the trigger gently for a slow speed and progressively increase the pressure
to produce correspondingly higher speeds (try before using the wrench).
3.2.6. When tightening, release the trigger as soon as the impact sound is heard.
Note: On critical fixings always check the torque with a torque wrench according to the vehicle manufacturers, or product, guidelines.
01284 757500
E-mail:
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for the incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name, address and postcode.
Sole UK Distributor,
Sealey Group
, Bury St. Edmunds, Suffolk.
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed below are in conformity with the following
standards and directives.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Tools.
25th January 2005
Signed by Mark Sweetman
The construction files for these products are held by the Manufacturer and
may be inspected, by a national authority, upon request to Jack Sealey Ltd.
Cordless Impact Wrench
Model CP1211.V3
Battery Charger
Model CP1211/C
73/23/EEC LV Directive
89/336/EEC EMC Directive
Web address: www.sealey.co.uk
CP1211.V3 - 1 - 250105
