background image

#

6.  coNNectiNg the tester

6.1.  Before testing a battery in a vehicle, turn off the ignition, all accessories and loads. close all of the vehicle`s 

doors and boot lid.

6.2.  make sure the battery terminals are clean. use a wire brush to clean them if necessary. note: this tester works 

best if the battery connects have been removed and the battery posts have been cleaned. Any corrosion between 
the tester clamps and the battery connectors, or between the battery connectors and the battery posts, will 

degrade the tester`s efficiency.

6.3.  connect the positive (red) clamp to the positive (Pos,P,+) battery post. connect the negative (black) clamp to the     

negative (neG,n,-) battery post.

7.  operatiNg iNstructioNs

7.1.   

 battery test

7.1.1.  run the         App on your mobile device and log in.
7.1.2.  Press “scan+” in the upper right corner of the Home screen. (if the test icon is red, the tester is connected; no 

need to proceed to Scan+.) The system will scan and find the tester.

7.1.3.  once the tester shows on the screen, select “Press to start” to connect.
7.1.4.  W

hen connected, press “CONNECTED CONTINUE” (fig.6). In this screen, the user may create a name for the 

tester. (fig.9)  Swipe the “TEST>” area (fig.7) of the active tester to bring up the Edit option. (fig.8)

   fig.2

   fig.3

   fig.4

   fig.5

Bt3000 | issue 1 12/04/17

Original Language Version

© Jack sealey limited

Summary of Contents for BT3000










Reviews: