background image

instructions for

bluetooth ® battery tester

model no:

 

bt3000

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used 

according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL 

REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE 
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL 
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

      refer to

   instructions

      electrical

        shock

       hazard

 Wear eye

protection

 Wear protective

gloves

 Warning:

corrosive 

substance

 Warning:

explosive

material

 Keep away 

from sources of 

ignition

 use in well 

ventilated areas

 Keep in dry area 

protect from rain

Bt3000 | issue 1 12/04/17

Original Language Version

© Jack sealey limited

1.

safety

 

9

 read the entire manual before using this product. failure to do so could result in serious injury or death.

 

9

 the tester is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 
concerning the use of the tester by a person responsible for their safety.

 

8

 

Do Not

 operate the tester if it has received a sharp blow, been dropped or otherwise damaged in any way.

 

8

 

Do Not

 not disassemble the tester.

 

9

Batteries generate explosive gases during normal battery operation. to reduce the risk of a battery explosion, 
follow these instructions and those published by the battery manufacturer or any equipment you intend to use 
in the vicinity of the battery. review the cautionary markings on these products and on the engine.

 

8

Do Not

 smoke or allow a spark or flame in the vicinity of a battery or engine.

 

9

remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid 
battery. A  lead-acid battery can produce a short-circuit current high enough to weld a ring or the like, to metal, 
causing a severe burn.

Summary of Contents for BT3000










Reviews: