background image

Original Language Version

© Jack sealey limited

 Bt105 | issue:1  09/05/16

5.5.1.   

select  battery  type

Battery type

1. regular flooded

2. AGm flat Plate.

3. AGm sprial

4. Gel

5. efB

 

Press Up/Down keys to select battery type then press enter key to confirm.

 

the battery tester will test each battery according to the selected system and rating.

 

Press Up/Down key to select according to the actual system standard and rating specified on the battery being tested.

select input

                 ccA

                

  

 

 input correct rating and press enter Key. it takes approx. 3 seconds to display the battery test results. 

select input

                 500

                 ccA

                

 

        battery test results

 

good battery

Healthy:96%           490ccA

charge:98%            12.64V

internal r=6.1m

Ω

rated:500A

Good BAtterY

 

there is no problem with the battery and is ok to use.

 

 

good recharge

Healthy:78%           440ccA

charge:30%            12.2V

internal r=7.2m

Ω

rated:500A

Good, recHArGe

 

Good battery but low current, recharge before use.

 

 

replace

Healthy:46%           490ccA

charge:80%            12.68V

internal r=18.1m

Ω

rated:500A

rePlAce

 

Battery is near end or at end of life, replace battery.

 

 

bad Cell, replace 

Healthy:0%           0ccA

charge:20%            10.64V

internal r=45.2m

Ω

rated:500A

BAd cell, rePlAce

 

Battery interior damaged, bad cell or short circuit, replace battery.

 

 

Charge, retest

Healthy:39%           310ccA

charge:20%            12.08V

internal r=30.1m

Ω

rated:500A

cHArGe - retest

 

unstable battery, recharge, retest. if the same test result appear after recharge and retest, the battery is damaged, replace battery.

 

After testing remove clips from battery and store in a dry, childproof location.

  

 

Summary of Contents for BT105










Reviews: